Which Sandpaper Grit for Drywall
Drywall sanding is a critical step that defines the quality of your finished walls. Even the most skilled joint compound application can look uneven if the sanding is not executed correctly. Knowing what grit sandpaper for drywall to use at different stages ensures that your surface becomes paint-ready and professional. The process is not about force but about control.
When executed with precision, drywall sanding levels joints, gets rid of ridges, and results in a flawless, perfectly smooth surface ready for painting.
Importance of Sandpaper Grit in Drywall Sanding
The grit number on sandpaper indicates how coarse or fine the abrasive surface is. A lower number means the sandpaper is coarse and removes material quickly, while a finer number provides a smoother finish. Choosing the right drywall sanding grit prevents damage such as paper face scratches, deep scratches, or uneven patches.
If the grit is too coarse, it can damage the drywall paper or leave swirl marks that show up under paint. If it’s too fine too early, it can miss imperfections. The goal is to move gradually from medium to fine grit for a seamless finish.
Drywall Sanding Grit Progression
Professional drywall finishers typically follow a progressive grit progression to achieve optimal results:
• 100–120 grit: Used for initial sanding to remove uneven spots after joint compound application. This grit should be used with care to prevent surface tearing.
• 120–150 grit: Used for intermediate sanding once the major imperfections are removed. This grit provides the main shaping and blending phase.
• 180–220 grit: Best for pre-paint sanding. It creates a consistent surface without imperfections.
This sequence ensures each layer of compound is evenly finished, resulting in a durable wall.
Tools and Equipment for Sanding Drywall
Using proper tools is as important as selecting the right grit. Quality equipment helps maintain even pressure, reduces fatigue, and keeps dust under control.
Common tools include:
• Hand sander for detail work
• Extension sander for large surfaces
• Sanding sponges for corners and curved areas
• Mesh sanding sheets for airflow
• Mask to prevent dust exposure
• Angle light for better visibility
These tools help ensure professional-quality outcomes without damaging the drywall paper.
How to Sand Drywall Like a Pro
Sanding drywall is a careful process. Following professional techniques prevents common surface flaws and ensures your work looks seamless once painted.
1. Let the Joint Compound Dry Completely
Always wait for the compound to dry fully before sanding. Partially dried mud will smear and ruin your finish. Fully cured compound turns into fine dust when sanded, allowing for smooth sanding.
2. Apply Light, Even Pressure
Avoid pressing too hard. Let the sandpaper do the work while maintaining steady strokes. Excessive pressure can create gouges.
3. Feather the Edges
Blend the joint compound smoothly into the drywall using light overlapping passes. Focus on edges rather than flat surfaces to create a smooth appearance.
4. Use Angled Lighting
Shine a light across the wall’s surface to highlight high and low spots that might not be visible head-on. This ensures all marks are addressed before painting.
5. Switch to Finer Grit for Final Passes
Once the wall feels flat and smooth, move to 180–220 grit sandpaper. This stage perfects the finish and prepares the wall for primer application.
Tips for Sanding Edges and Corners
Corners and edges need gentle technique. Use a fine-grit sanding sponge or folded sandpaper to reach these areas. Sand one side at a time with light passes to avoid damaging the tape or paper.
For inside corners, a few light passes are usually enough to eliminate ridges without thinning the surface material. Controlled sanding is the key to maintaining joint integrity.
Drywall Sanding Errors to Watch For
Many DIY finishers make the mistake of being sandpaper grit for drywall finishing too aggressive or skipping crucial steps. To achieve a smooth outcome, avoid the following:
• Removing too much compound
• Choosing the wrong grit
• Forcing the sandpaper into the wall
• Failing to identify imperfections
• Breathing in drywall dust
Time, care, and accuracy matter more than speed during drywall sanding.
Getting Walls Ready for Primer
Before applying paint, ensure that the wall is completely free from sanding particles. Wipe the surface with a microfibre cloth or a vacuum attachment designed for drywall dust. Check all areas under angled light to confirm a consistent finish. Using final drywall sanding grit ensures a even and receptive surface for primer adhesion.
A properly sanded wall allows primer and paint to seal correctly, preventing visible marks and ensuring a professional result.
Wrapping Up
Mastering sandpaper grit for drywall finishing to use at each stage can dramatically enhance the quality of your walls. Start with medium grit to remove rough patches, move to finer grits for blending, and finish with ultra-fine sanding for that paint-ready surface.
By combining the right tools, lighting, and a consistent technique, you can achieve a high-end drywall finish that looks seamless under any paint or lighting condition. Careful sanding and control are the true secrets to expert-level drywall finishing.